Desktop PCI-E to SATA 3.0 Controller Expansion Card 8-Port SATA 3.0 6Gbps Board. Compliant with Serial ATA 3.0. With SATA2.0 SATA1.0. PCI-Express v2.0 compliant, backward compatible. With PCI-Express v1.0. Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps; supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i. Supports AHCI1.0 mode and IDE mode, native queue (NCQ), FIS based on port multiplier switch or switching and hot plug. SATA6G, 3G and 1.5G hard drives. SATA3.0 data cable for best results. PCI-E to SATA 3.0 Card. Interface: PCI-E 1X 2X 4X 8X 16X. Expansion Interface: 8 x SATA3.0 Interfaces. 1 x Expansion Card. 1 x Semi-High Baffle. 1 x Driver Disc. PCI-E must have a slot above V2.0, V1.0 will not exceed 250M, PCI-E can be X1 or X16 as long as it is V2.0 version, there is spare X16 slot directly into X16 slot on. BOIS setting of the motherboard: SATA mode should be changed to AHCI, although some motherboard PCIE is version 2.0, but BOIS does not enable high- transmission mode by default (gen2 high mode) needs to be manually turned on. In PCI-E 1.0 mode, only 200- 250M, 2.0 mode is below 350-400M. If you don’t accept it, change the motherboard. When the SATA port is used at the same time, it will slow down. It is not suitable for users who are pursuing. It is only used for the extended hard disk interface. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item “PCE8SAT-M01 PCI-E to SATA III Expansion Adapter Boards 8-Port PCI-E 1X2X4X8X16X” is in sale since Wednesday, December 4, 2019. This item is in the category “Computers/Tablets & Networking\Computer Components & Parts\Interface/Add-On Cards\Port Expansion Cards”. The seller is “3c_topstore” and is located in Shenzhen. This item can be shipped worldwide.
- Brand: Unbranded
- Expansion Interface: 8 x SATA3.0 Interfaces
- Interface: PCI-E 1X 2X 4X 8X 16X
- Master: Fit for Marvell 88SE92xx+JMB5XX
- Model: PCE8SAT-M01
- Type: PCI-E to SATA 3.0 Card
- MPN: Does Not Apply