PCI-E SATA 2X 4X 8X 16X Cards to SATA 3.0 6-Port SATA III 6Gbps with Date Cable

Posted on September 13, 2021 by admin

XT-XINTE PCI-E SATA 2X 4X 8X 16X PCI-E Cards PCI Express to SATA 3.0 6-Port SATA III 6Gbps Expansion Adapter Boards with Date Cable. Compliant with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0. Compliant with PCI-Express v2.0 specification, backward compatible with PCI-Express v1.0. Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps. Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i. Support AHCI1.0 mode and IDE mode. Support for native command queue (NCQ). Support FIS based on port multiplier switch or command switching. Support hot swap and hot swap. Compatible with SATA6G, 3G and 1.5G hard drives. Bus interface: PCI-Express x1 slot. Expansion interface: 6 SATA3.0 interfaces. System Requirements: One PCI Express X1 slot is available, supporting both PCI-E X2 X4 X8 X16. Operating system: Windows10/8/7 (32/64 bit) / Vista (32/64 bit) / XP/2003/2008/linux. DRIVER\SATA CARD\Marvell\91XX_92XX Setup, then select the appropriate folder according to the system. The PCIE to SATA3.0 riser card is used as follows. First, the system disk and PCIE to SATA3.0 riser card connection conditions and solutions. The SATA interface mode of PCIE to SATA3.0 is AHCI mode. If you want to plug in the system disk on our card, the premise is that your system disk must be installed in AHCI mode when installing the system on the motherboard. Otherwise, it will not pass. Our card riser card starts the system. If it is determined that the SATA interface installation system of the system disk inserted in the motherboard is AHCI mode, then you can directly insert the hard disk into our card, and then enter the motherboard BIOS to set the system disk as the first boot. 3, the above two conditions are available, if it still can not start, or repeated reboots, then the motherboard’s hard disk interface and our adapter card conflict, the solution is to enter the motherboard BIOS, set the motherboard’s hard disk interface options to Disabled, save and restart to start the system. Second, the common disk and PCIE to SATA3.0 connection conditions and solutions. When the system disk is plugged into the motherboard, the ordinary disk is inserted in the PCIE to SATA3.0 card, then only the adapter card information and the ordinary disk model need to be detected at startup. 2, if the condition is established, or can not start the system, then you must enter the motherboard BIOS, set the system disk to the first boot. Third, the system disk and the ordinary disk and PCIE to SATA3.0 connection and solution. Prerequisites, if the system disk with the original motherboard installed system is AHCI mode test, can use the following methods to achieve, if it is IDE mode installed system, then you can only reinstall the system through PCIE to SATA3.0. 2, 1 condition is established, you can not start to enter the motherboard BIOS, set the system disk to the first boot. 3, 1.2 conditions are met, or can not start, then it may be integrated SATA interface conflict, please enter the motherboard BIOS to set SATA to Disabled. 1 x SATA III (6Gbps) 6-port PCI-Express Controller Card. 1 x CD Driver. 1 x Low Profile Bracket. 6 x Date Cable. The item “PCI-E SATA 2X 4X 8X 16X Cards to SATA 3.0 6-Port SATA III 6Gbps with Date Cable” is in sale since Tuesday, December 24, 2019. This item is in the category “Computers/Tablets & Networking\Computer Components & Parts\Laptop Replacement Parts\Other Laptop Replacement Parts”. The seller is “z-standby” and is located in . This item can be shipped worldwide.

Custom Bundle: No
MPN: Does Not Apply
Country/Region of Manufacture: China
Compatible Brand: For HP
Brand: XT-XINTE
Type: Power Jack

PCI-E to 6Gbps SATA3.0 8-Port SATA III Expansion Controller Card Adapter RAID BS

Posted on July 24, 2021 by admin

PCI-E to 6Gbps SATA3.0 8-Port SATA III Expansion Controller Card Adapter RAID BS. Compliant with Serial ATA 3.0 specification. Backward compatible with SATA2.0 SATA1.0; PCI-Express v2.0 compliant, backward compatible with PCI-Express v1.0. Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps; supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i. Supports AHCI1.0 mode and IDE mode, native command queue (NCQ), FIS based on port multiplier switch or command switching and hot plug. Compatible with SATA6G, 3G and 1.5G hard drives. User with SATA3.0 data cable for best results. Item Type:PCI-E to SATA 3.0 Card Model. PCI-E 1X 2X 4X 8X 16X. Fit For Windows 7/8/XP/10 Fit For Ubuntu. Expansion Interface: 8 x SATA3.0 Interfaces. 1 x Expansion Card. 1 x Semi-High Baffle. 1 x Driver Disc. PCI-E must have a slot above V2.0, V1.0 will not exceed 250M, PCI-E can be X1 or X16 as long as it is V2.0 version, there is spare X16 slot directly into X16 slot on. BOIS setting of the motherboard: SATA mode should be changed to AHCI, although some motherboard PCIE is version 2.0, but BOIS does not enable high-speed transmission mode by default (gen2 high speed mode) needs to be manually turned on. In PCI-E 1.0 mode, only 200- 250M, 2.0 mode is below 350-400M. If you don’t accept it, change the motherboard. When the SATA port is used at the same time, it will slow down. It is not suitable for users who are pursuing speed. It is only used for the extended hard disk interface. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item “PCI-E to 6Gbps SATA3.0 8-Port SATA III Expansion Controller Card Adapter RAID BS” is in sale since Tuesday, June 16, 2020. This item is in the category “Computers/Tablets & Networking\Computer Components & Parts\Interface/Add-On Cards\Port Expansion Cards”. The seller is “bettershopping360″ and is located in Shenzhen. This item can be shipped worldwide.

Brand: Unbranded
Expansion Interface: 8 x SATA3.0 Interfaces
Interface: PCI-E 1X 2X 4X 8X 16X
Master: Fit for Marvell 88SE92xx+JMB5XX
Model: PCE8SAT-M01
Type: PCI-E to SATA 3.0 Card
MPN: Does Not Apply

PCI-E SATA3.0 expansion card 8 port sata3 SATA III 6G Marvell double chip

Posted on June 4, 2019 by admin

PCI-E SATA3.0 expansion card 8 port SATA3 SATA III 6G Marvell double chip. Marvell 88SE9215 + 88SM9705 chipset. 1 -Lane PCI-Express 2.0 interface, up to 6.0 Gbps. 8 Internal SATA and 4 External eSATA ports. Connect up to 8 SATA devices at a time. Supports Native Command Queuing (NCQ). Drive Activity Indicator Cable Included. Comes with standard and low-profile brackets. 1 x PCI-E SATA3.0 expansion card 8 port SATA3 SATA III 6G Marvell double chip. 1 x Low Profile Bracket. 1 x Driver CD. 1 x User Manual. 5V 4 Channel Relay.. Bluetooth 4.0 USB.. 3.5″ to 5.25″ Drive.. Black L2 R2 Trigger.. Dual Fan Mount Rack.. New 3.5 Hard Drive.. 5.25 PC HDD CPU.. We strive to bring you a pleasant shopping experience with us. If there is any dissatisfaction or any issues with your order, please. We always try our best to resolve the issues. Please give us the opportunity to resolve any problem. Your recognition will make us more confident to develop business and serve you better. Leave negative or neutral feedback if you havent received item in 30 days. You to solve the problem. Founded in 2013, AceHotDeals is a small but motivated company specializing in Computer Hardwares and Maker Electronics. We believe passionately in great bargains and excellent service, which is why we commit ourselves to giving you the best of both. We offer a wide varieties of products, including computer hardwares, electronics components, Arduino and Raspberry Pi Kits and modules, 3D printer and CNC components. We strive to provide the best deals to you and help you make your project successful. Come visit us to learn more about AceHotDeals. The item “PCI-E SATA3.0 expansion card 8 port sata3 SATA III 6G Marvell double chip” is in sale since Friday, September 7, 2018. This item is in the category “Computers/Tablets & Networking\Enterprise Networking, Servers\Server Components\Disk Controllers/RAID Cards”. The seller is “acehotdeals101″ and is located in shenzhen, guangzhou. This item can be shipped worldwide.

Interface Card Type: SATA Cards
Internal Interfaces: SATA III
MPN: ACE-CMP-329
UPC: 769700305913
Compatible Port//Slot: PCI Express x1
Country//Region of Manufacture: China
Brand: Unbranded/Generic

PCI-E SATA 480GB SSD for Apple Mac Pro 3,1-5,1 Pre-installed of Mac OS X 10.10.5

Posted on December 29, 2018 by admin

You may receive SanDisk or Kingston or Transcend brand SSD “randomly”. The item “PCI-E SATA 480GB SSD for Apple Mac Pro 3,1-5,1 Pre-installed of Mac OS X 10.10.5″ is in sale since Tuesday, December 4, 2018. This item is in the category “Computers/Tablets & Networking\Drives, Storage & Blank Media\Hard Drives (HDD, SSD & NAS)\Solid State Drives”. The seller is “local338″ and is located in HongKong. This item can be shipped worldwide.

Model: TS480GSSD220S / SDSSDA-480G-G26 480GB
Modified Item: No
Custom Bundle: No
Interface: PCI Express 2.0
Compatible Mac Pro Model: 3,1 / 4,1 / 5,1 ( From 2008 – 2012 )
MPN: TS480GSSD220S / SDSSDA-480G-G26
Storage Capacity: 480GB
Brand: SanDisk / Transcend / nanoTECH’
Form Factor: 2.5″
Non-Domestic Product: No

PCI-E x4 SATA RAID Card Controller PCIe to SATA3 NGFF M. 2 Adapter Indudtrial

Posted on April 25, 2018 by admin

22pin Standard SATA III + 7 pin SATA II. This 22pin Standard SATA III + 7 pin SATA III +NGFF M. Plus, the SATA controller card offers an effective hardware RAID solution, with native RAID (0, 1, 1+0) support. Compliant with PCI-Express Specification V2.0 and Backward Compatible with PCI-Express 1. PCI-Express x4 Interface(actual x2 speed) is Compatible with PCI-Express x4, x8, and x16 slots. Supports Communication Speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps. Hot Plug and Hot Swap. Supports Native Command Queue (NCQ). Supports Port Multiplier FIS Based Switching or Command Based Switching. RAID 0, 1, 10 (for EST11B only). The item “PCI-E x4 SATA RAID Card Controller PCIe to SATA3 NGFF M. 2 Adapter Indudtrial” is in sale since Friday, April 13, 2018. This item is in the category “Computers/Tablets & Networking\Computer Components & Parts\Interface/Add-On Cards\Disk Controllers/RAID Cards”. The seller is “polotek” and is located in Shenzhen. This item can be shipped worldwide.

External Interfaces: SATA III
Support: Hyperduo
Expansion Interface 3: 2.5″ SATA
Expansion Interface 2: 7Pin SATA
Expansion Interface 1: NGFF M.2
PCIE Type: x4 SATA Raid Card
MPN: Does Not Apply
Bundle Listing: No
Raid: RAID 0,1, 10 (for EST11B only)
Interface Card Type: RAID Cards
Compatible with: X4 x8 x16
SATA Port Compatible with: SATA II(3.0Gbps),SATA I(1.5Gbps)
Brand: IT-GO
Item Name: SATA RAID Controller
Compatible Port/Slot: PCI Express x4
Type: RAID Controller Card
Country/Region of Manufacture: China
RAID Levels: 0
Internal Interfaces: PCIe x4

6 pcs PCI-E Extender Riser Card+6GPU Intel Motherboard For BTC Eth Rig Ethereum

Posted on March 22, 2018 by admin

Product name:Mining Motherboard. CPU DIMM Type:LGA 1150. Number of USB port:8. Support disk array :no. Support memory type:DDR3. Product Name: Stable Version PCI Express 1x to 16x Riser. Material: Metal + Plastic. USB Cable Length: 60cm. Power Connector: 6 pin power cable. Supports high speed PCI-E 1x, 4x, 8x, 16x card (but only provide 1x speed). 2 x SATA Cable. 1 x I/O Backboard. 1 x Drives Installed CD. 1 x User Manual. 6 x PCI-E 16X Adapter. 6 x PCI-E 1X Riser Board. 6 x USB3.0 Cable. 6 x SATA 15pin Power Cable. When plug wire must identify the direction, not to counter or offset, prevent burning equipment, plug wire when the socket of equipment first, then plug wire, avoid too hard plug socket pin is broken. Immediately you paid for the order. If the item is from US/UK/AU, I will pay the taxi for you. Communication always is best way to solve problem. We accept any return in 14 or 30 days that we promise. If item is defect or wrong when it. Please never return the parcel without agreement. If you don’t get RAM NO from us, it is no possible for us to get the parcel. Because the Ratings below 5 are equal to You are NOT satisfied. Your recognition is our motivation in developing our small company and improving our service for each customer. It’ll take you one minute only. If you’re not satisfied with our goods or service, please write to us immediately so that we can help you out. Sincerely hope you do not leave us any negative or neutral feedback. Communication is very important, we believe we can resolve all the problem with each other. We are a leading wholesaler and distributor of Battery, electronic parts and accessories for an assortment of mobility products including Laptop, Computers, Apple, Veheicle, Modules, Sport Gym, SmartPhone. We will give you the best advise. We welcome to answer any questions you have. (weekend and holidays excluded). The item “6 pcs PCI-E Extender Riser Card+6GPU Intel Motherboard For BTC Eth Rig Ethereum” is in sale since Thursday, February 15, 2018. This item is in the category “Coins & Paper Money\Virtual Currency\Miners”. The seller is “ubestshopping” and is located in Shen Zhen. This item can be shipped worldwide.

Brand: ubestshopping
MPN: Does Not Apply
Country/Region of Manufacture: China
Type: H81-BTC
SATA: SATA III
CPU DIMM Type: LGA 1150
Memory channel: two-channel
Maximum Memory: 16GB
Support memory type: DDR3
Weight: 750g
Material: Metal + Plastic
USB Cable Length: 60cm

PCI-E Extender Riser Card BTC Eth Rig Ethereum 6 GPU H81 SATA III Motherboard US

Posted on February 21, 2018 by admin

PCI-E Extender Riser Card for BTC Eth Rig Ethereum 6 GPU H81 Mining Motherboard. Features: – 100% Brand new and high quality. Material:Metal + Plastic – Board Size:128x43mm – Power Connector: 6 pin power cable – Product name:Mining Motherboard – Chipset:H81 – Graphics:integrated graphics – SATA:SATA III – SLI:CrossFire&SLI – Type:H81-BTC – CPU DIMM Type:LGA 1150 – Number of USB port:8 – Memory channel:two-channel – Support disk array :no – OnBoard LAN:yes – Support memory type:DDR3 – Maximum Memory:16GB – Supports high speed PCI-E 1x, 4x, 8x, 16x card (but only provide 1xspeed) Notice: – When plug wire must identify the direction, not to counter or offset, prevent burning equipment, plug wire when the socket of equipment first, then plug wire, avoid too hard plug socket pin is broken. Due to the different monitor and light effect, the actual color maybe a slight different from the picture color. Please allow 1-2cm differs due to manual measurement. Package List: – 1 x PCI-E 1X Riser Board. Or unpaid dispute will be filed for non-payer after 7 days of sales day. If you receive defective item, please kindly notify us within 14 days. The item “PCI-E Extender Riser Card BTC Eth Rig Ethereum 6 GPU H81 SATA III Motherboard US” is in sale since Thursday, February 08, 2018. This item is in the category “Computers/Tablets & Networking\Computer Components & Parts\Motherboards”. The seller is “topskyrc” and is located in California. This item can be shipped worldwide.

Expansion Slots: PCI
Input/Output Ports: SATA III
Brand: Unbranded/Generic
MPN: Does Not Apply

6X PCI-E Extender Riser Card+6GPU Intel H81 Motherboard For BTC Eth Rig Ethereum

Posted on February 20, 2018 by admin

Product name:Mining Motherboard. CPU DIMM Type:LGA 1150. Number of USB port:8. Support disk array :no. Support memory type:DDR3. Product Name: Stable Version PCI Express 1x to 16x Riser. Material: Metal + Plastic. USB Cable Length: 60cm. Power Connector: 6 pin power cable. Supports high speed PCI-E 1x, 4x, 8x, 16x card (but only provide 1x speed). 2 x SATA Cable. 1 x I/O Backboard. 1 x Drives Installed CD. 1 x User Manual. 6 x PCI-E 16X Adapter. 6 x PCI-E 1X Riser Board. 6 x USB3.0 Cable. 6 x SATA 15pin Power Cable. When plug wire must identify the direction, not to counter or offset, prevent burning equipment, plug wire when the socket of equipment first, then plug wire, avoid too hard plug socket pin is broken. Immediately you paid for the order. If the item is from US/UK/AU, I will pay the taxi for you. Communication always is best way to solve problem. We accept any return in 14 or 30 days that we promise. If item is defect or wrong when it. Please never return the parcel without agreement. If you don’t get RAM NO from us, it is no possible for us to get the parcel. Because the Ratings below 5 are equal to You are NOT satisfied. Your recognition is our motivation in developing our small company and improving our service for each customer. It’ll take you one minute only. If you’re not satisfied with our goods or service, please write to us immediately so that we can help you out. Sincerely hope you do not leave us any negative or neutral feedback. Communication is very important, we believe we can resolve all the problem with each other. We are a leading wholesaler and distributor of Battery, electronic parts and accessories for an assortment of mobility products including Laptop, Computers, Apple, Veheicle, Modules, Sport Gym, SmartPhone. We will give you the best advise. We welcome to answer any questions you have. (weekend and holidays excluded). The item “6X PCI-E Extender Riser Card+6GPU Intel H81 Motherboard For BTC Eth Rig Ethereum” is in sale since Monday, December 18, 2017. This item is in the category “Computers/Tablets & Networking\Computer Components & Parts\Motherboards”. The seller is “htpow” and is located in Shen Zhen. This item can be shipped worldwide.

Brand: htpow
MPN: Does Not Apply
Country/Region of Manufacture: China
Type: H81-BTC
SATA: SATA III
CPU DIMM Type: LGA 1150
Memory channel: two-channel
Maximum Memory: 16GB
Support memory type: DDR3
Weight: 750g
Material: Metal + Plastic
USB Cable Length: 60cm

PCI-e v2.0 Marvell 9215 4xSATA3.0 Controller PCI-e to SATAIII 6G Expansion Card

Posted on February 7, 2018 by admin

SATA III 4-port PCI-e SATA3.0 Controller Card. With Full and Low Profile Brackets Marvel 9215 chipset Win8/7 2U. 4 Internal SATA 6Gb/s Ports. PCI – Experss specification V2.0. Compliant with PCI-Express Specification v1.0. Compliant with Serial ATA Specification 3.0 PCI Express X1 interface, compatible with PCI Express X2, PCI Express x4, by 8 and x16 slot. Supports Communication Speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps. Hot Plug and Hot Swap. Supports Native Command Queue (NCQ). Supports Port Multiplier FIS Based Switching or Command Based Switching. Compatible with SATA 6G, 3G and 1.5G Hard Drives. Dimension: L 7 x W 5.5 x H 1.5 inch. Windows 8/Windows 7/Vista/Windows XP/Server 2008/Server 2008 R2/Server 2003/. X and Above (AHCI devices driver is a built-in feature). 1xSATA III 4-port PCI-e Controller Card. 2xSATA Cables Length:50cm approx. Please verify your address during checkout. We are not responsible for any wrong or undeliverable addresses. You can contact me. If you are not satisfied when you receive your item, please return it right now for a replacement. We sincerely invite you to our store frequently and really hope to make friends with you. We promise to try our best to resolve problem. Good communication is always the best way to resolve problem, right? The free listing tool. The item “PCI-e v2.0 Marvell 9215 4xSATA3.0 Controller PCI-e to SATAIII 6G Expansion Card” is in sale since Monday, July 24, 2017. This item is in the category “Computers/Tablets & Networking\Computer Components & Parts\Interface/Add-On Cards\Disk Controllers/RAID Cards”. The seller is “szruiqicn” and is located in GD. This item can be shipped worldwide.

Type: RAID Controller Card
Brand: Unbranded/Generic
MPN: Does Not Apply
Compatible Port/Slot: PCI Express x1
Internal Interfaces: SATA II
External Interfaces: SATA II

PCI-E SATA 240GB SSD for Apple Mac Pro 3,1-5,1 Preloaded with Mac OS X 10.11.6

Posted on January 13, 2018 by admin

Original PNY 240GB SSD Drive for Mac Pro 3,1 4,1 5,1. SDD might be from various models, ADATA, Sandisk, HP or other quality major brand, New installed on new pci bracket. With all the software installed and optimized you still will get about 187GB of free storage. For Creative Professionals & Enthusiasts: PNY SSD is a great upgrade for any Mac Pro Boot drive, resulting in a faster more responsive overall professional experience. Benefits of upgrading to an SSD and running in PCI Express Slot: -Unlock the full Performance Potential of your Mac Pro! No more limiting the rest of your hardware like the processor(s). Fasters OS X boot times and apps load up instantly. A more overall responsive experience for power users and multi-taskers who run multiple apps across multiple monitors -Much Faster Read/Write speeds, speed up professional apps -Frees up Caddie Bay, great for power users who run multiple Mac OS X. Internal to be mounted on one of the multiple PCI-Express X16 slots (X16 is recommended for fastest speeds) in your Mac Pro, very easy to install. No extra power needed. Great for developers, gfx artists, video editors, content creators etc. It’s a Plug-n-Play setup. Requires no extra steps to install. All you have to do is. Install the hard drive. Hold the “option” key on the first boot. Select your choice of Mac OS X. For Mac Pro 3,1 wil need to manually select this Boot volume on first startup. Installed with Mac OS X 10.11.6 El Capitan , modified and Optimized for Mac Pro 2008,2009,2010,2012. Here is your chance to check out the latest Mac OS X El Capitan on Mac Pro, upgrade and enjoy more years with your Mac Machine! This versions of Mac OS X won’t work in. IMac, MacBook, MacBook Pro. Mac Pro 1,1 2006 or Mac Pro 2,1 2007 or Power MAC. Send your questions and offers and you will receive a prompt response. Respond to any of your questions and offers as quickly as possible sometimes within an hour or less of your inquiry. SOFTWARE INCLUDED (For all software check pictures above, 73 total applications). Acrobat X Pro After Effects CS5.5 Audition CS5.5 Bridge CS5.1 Contribute CS5.1 Device Central CS5.5 DreamWeaver CS5.5 Encore CS5.1 Extension Manager CS5.5 Fireworks CS5.1 Flash Builder 4.5 Flash Catalyst CS5.5 Flash CS5.5 illustrator CS5.1 InDesign CS5.5 Media Encoder CS5.5 On Location CS5.1 Photoshop CS5.1 Premier Pro CS5.5 Story. KeyNote Garage Band iMovie. Word Excel Power point Outlook. The item “PCI-E SATA 240GB SSD for Apple Mac Pro 3,1-5,1 Preloaded with Mac OS X 10.11.6″ is in sale since Wednesday, January 03, 2018. This item is in the category “Computers/Tablets & Networking\Desktops & All-In-Ones\Apple Desktops & All-In-Ones”. The seller is “fastek4you” and is located in Yakima, Washington. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Russian federation, New Zealand, Philippines, Singapore, Switzerland, Norway, Ukraine, Croatia, Malaysia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Pakistan.

Brand: PNY/MAC/Other
Product Family: Mac Pro
MPN: CS900 SSD
Storage Type: SSD (Solid State Drive)
Hard Drive Capacity: 240GB
Operating System: Mac OS X 10.11 El Capitan
Mac Pro Compatibility: Mac Pro 2008,2009,2010,2012
Hard Drive Model: SSD7CS900-240-RB
Interface: PCI Express 2.0, SATA III

Pci Sata Iii

Category Archives: pci-e